金属加工産業向け製品レンジ
PRODUCTS | DESCRIPTION | Product Data Sheet |
DROSERA MS |
Multipurpose range for machine tools lubrication: slideways, feed and gear boxes, hydraulic, spindle movements (depending on viscosity grade). |
お問い合わせください。 |
DROSERA FB 68 |
Biocide reinforced way lubricant. |
お問い合わせください。 |
DROSERA HXE 68 |
Way lubricant specifically developed for machines equipped with synthetic slideways and operating with soluble cutting fluids. |
お問い合わせください。 |
DROSERA HXE 220 |
Way lubricant specifically developed for machines equipped with synthetic slideways and operating with soluble cutting fluids. |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
VALONA GR 3005 |
Lapping, superfinishing and grinding of high-carbon steels |
お問い合わせください。 |
VALONA GR 3008 |
Lapping, superfinishing and grinding of high-carbon steels |
お問い合わせください。 |
SCILIA MS 3040 |
Mild cutting operations and machine tools lubrication. Well suited to copper and copper alloys. |
お問い合わせください。 |
VALONA MS 5020 |
Precision turning and common machining operations on copper or aluminium alloys, and up to hard steel. |
お問い合わせください。 |
VALONA ST 5022 |
Precision turning and common machining operations on ferrous alloys up to bearing steel. |
お問い合わせください。 |
VALONA MS 5009 |
Precision turning of copper or aluminium alloys, low-carbon and medium-high-carbon steels. |
お問い合わせください。 |
VALONA AU 5510 |
Dedicated to precision turning and common machining operations on copper and aluminium alloys. Also recommended for grinding. |
お問い合わせください。 |
VALONA MS 7023 |
Heavy and very heavy duty machining of all materials from copper to special and refractory steels. Suitable for titanium machining. |
お問い合わせください。 |
VALONA ST 9520 |
Difficult internal operations: gear hobbing and grinding of highly alloyed or refractory steels and titanium alloys. |
お問い合わせください。 |
VALONA BR 9015 |
High-speed broaching of highly alloyed steels and other very heavy duty machining operations. |
お問い合わせください。 |
VALONA MQL 5035 |
Minimum quantity lubrication. |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
FINAROL B5746 |
Protection and little-severe deformation of the electrozinc-coated sheet steel |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
DRASTA C 1000 |
Hardening of steels possessing good quenching power. |
お問い合わせください。 |
DRASTA C 1500 |
Hardening of steels possessing good quenching power. |
お問い合わせください。 |
DRASTA C 5000 |
Hardening of medium-to-good quenchabilty steels. |
お問い合わせください。 |
DRASTA C 7000 |
Difficult internal works: gear hobbing, grinding of highly alloyed, refractory steels and titanium alloys |
お問い合わせください。 |
DRASTA M 7000 |
Hardening of steels possessing good quenching power. |
お問い合わせください。 |
DRASTA H 7000 |
Hardening of steels possessing good quenching power. |
お問い合わせください。 |
DRASTA MAX C |
Quench accelerator concentrate for cold quenching oils. |
お問い合わせください。 |
DRASTA MAX H |
Quench accelerator concentrate for hot and semi-hot quenching oils. |
お問い合わせください。 |
DRASTA SY 600 |
CWater hardening retarders for hardening of parts designed for tool manufacture, car industry, agriculture or gardening. |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
LUBRILAM S 31 L |
Narrow cut rolling base for semi-finishing to finishing operations |
お問い合わせください。 |
LUBRILAM S 40 L |
Viscous rolling base for preliminary work operations |
お問い合わせください。 |
LUBRILAM CLEANER |
Air purification oil |
お問い合わせください。 |
LUBRILAM C 3 |
Concentrate of alcohol-type performance additives to increase the smoothness of the rolling base |
お問い合わせください。 |
LUBRILAM C 6 |
Concentrate of ester-type performance additives to increase the smoothness of the rolling base |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
OSYRIS 1000 |
Oily |
お問い合わせください。 |
OSYRIS DWX 1000 |
Oily after evaporation of the solvent |
お問い合わせください。 |
OSYRIS 3000 |
Oily |
お問い合わせください。 |
OSYRIS DWX 3000 |
Oily after evaporation of the solvent |
お問い合わせください。 |
OSYRIS DWY 3500 |
Oily after evaporation of the solvent |
お問い合わせください。 |
OSYRIS DWX 5000 |
Oily after evaporation of the solvent |
お問い合わせください。 |
OSYRIS DWY 5500 |
Oily after evaporation of the solvent |
お問い合わせください。 |
OSYRIS DWX 7000 |
Oily after evaporation of the solvent |
お問い合わせください。 |
OSYRIS X 9100 |
Varnish after evaporation of the solvent |
お問い合わせください。 |
OSYRIS DWX 9000 |
Waxy after evaporation of the solvent |
お問い合わせください。 |
OSYRIS DWL 3550 |
Oily after evaporation of the solvent |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
LACTUCA LT 3000 |
Conventional machining of free-cutting brass, copper alloys and high-grade carbon steels |
お問い合わせください。 |
LACTUCA MS 5000 |
Conventional machining of aluminium alloys, low- and medium-carbon steels |
お問い合わせください。 |
LACTUCA MSF 5200 |
Conventional machining of aluminium alloys, low- and medium-carbon steels without formaldehyde releases |
お問い合わせください。 |
LACTUCA MS 7000 |
Difficult and very difficult machining of cast iron, high-carbon, alloyed, stainless steels and aluminium alloys |
お問い合わせください。 |
LACTUCA MSF 7200 |
Difficult and very difficult machining of cast iron, high-carbon, alloyed, stainless steels and aluminium alloys without formaldehyde releases |
お問い合わせください。 |
LACTUCA MS 9000 |
Difficult and very difficult machining of hard metals, stainless steels and titanium: sawing, broaching, cold form tapping and deep drilling |
お問い合わせください。 |
LACTUCA MSF 9200 |
Difficult and very difficult machining of hard metals, stainless steels and titanium: sawing, broaching, cold form tapping and deep drilling without formaldehyde releases |
お問い合わせください。 |
SPIRIT MS 3000 |
Conventional machining of cast Iron and low-carbon steels recommended for surlace, cylindrical or centreless grinding |
お問い合わせください。 |
SPIRIT MSF 3200 |
MConventional machining of cast Iron and low-carbon steels recommended for surlace, cylindrical or centreless grinding without formaldehyde releases |
お問い合わせください。 |
SPIRIT MS 5000 |
Difficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys |
お問い合わせください。 |
SPIRIT MSF 5200 |
Difficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys without formaldehyde releases |
お問い合わせください。 |
SPIRIT ASI 7000 |
Difficult machining. |
お問い合わせください。 |
SPIRIT ASIF 7200 |
Difficult machining. |
お問い合わせください。 |
SPIRIT WBA 5000 |
Difficult machining of cast iron, high-carbon steels, alloyed steels and aluminium alloys |
お問い合わせください。 |
SPIRIT WB 7000 |
Difficult machining of cast Iron, high-carbon, alloyed, stainless steels and aluminium |
お問い合わせください。 |
SPIRIT WBF 7200 |
Difficult machining of cast Iron, high-carbon, alloyed, stainless steels and aluminium without formaldehyde releases |
お問い合わせください。 |
VULSOL MS 5000 |
Grinding. |
お問い合わせください。 |
VULSOL MSF 5200 |
Grinding. |
お問い合わせください。 |
VULSOL MS 7500 |
Difficult machining and grinding of steel, steel alloys and non-ferrous metals. |
お問い合わせください。 |
VULSOL MSF 7200 |
Difficult machining and grinding of steel, steel alloys and non-ferrous metals. |
お問い合わせください。 |
TREATMENT ADDITIVES FOR SOLUBLE FLUIDS
PRODUCTS | DESCRIPTION | Product Data Sheet |
ANTIFOAM MS 30 |
Anti-foaming recommended in post-treatment. Elimination of the foam formed during use of emulsions and synthetic fluids |
お問い合わせください。 |
EBOTEC BT 80 |
Curative treatment of aqueous machining, rolling, drawing and wire drawing fluids |
お問い合わせください。 |
CONTRAM CB 3 |
Cleaning of machine tools before oil change. Recommended for individual tanks and centralized systems |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
MARTOL EP 5 CF |
Cutting, forming. |
お問い合わせください。 |
MARTOL EP 65 CF |
Cutting, stamping, extrusion of transmission shafts, wire drawing of steels |
お問い合わせください。 |
MARTOL EP 100 CF |
Cutting, stamping and drawing of low- to medium-carbon steels |
お問い合わせください。 |
MARTOL EP 235 CF |
Cutting, stamping and drawing of low- to medium-carbon bars |
お問い合わせください。 |
MARTOL LVG 25 CF |
Mild- and medium-severe stamping operations. |
お問い合わせください。 |
MARTOL EV 10 CF |
Mild cutting and stamping operations. |
お問い合わせください。 |
MARTOL EV 40 CF |
Cutting of steel and aluminium strips |
お問い合わせください。 |
MARTOL EP 1000 |
For very difficult operations or thicknesses > 5 mm |
お問い合わせください。 |
MARTOL FMO 75 CF |
Pre-induction and stamping of aluminium strips for food packaging industry |
お問い合わせください。 |
MARTOL FMO 235 CF |
Pre-induction and stamping of aluminium strips for packaging industry |
お問い合わせください。 |
ETIRELF TRS 48 |
Stamping |
お問い合わせください。 |
PRODUCTS | DESCRIPTION | Product Data Sheet |
DIEL MS 5000 |
EDM fluid for roughing and finishing operations. |
お問い合わせください。 |
DIEL MS 7000 |
EDM fluid for semi-finishing and finishing operations. |
お問い合わせください。 |